A.K Enterprises

Temperature Range	setting upper and lower limits
Usage/Application	Industrial
Size	2 Inch
Input Voltage	220v
IP Rating	IP 22
Operating Voltage	(AC 220V 1500W)
Relay Life	1 Year
Model Name/Number	XH-W3001

Minimum order quantity: 100 Piece

This is XH-W3001 AC 220V 1500W Digital Temperature Controller Microcomputer Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost.

It offers a high-temperature control precision of 0.1  The temperature control range from -50 to 110

The LED display shows the results clearly. One can directly install or embed the XH-W3001 in industrial control equipment panel, convenient and quick.

It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.

Button functions :

• Press UP to show the start temperature button.
• On Long press of the UP button, the display starts flashing, then press the UP or DOWN button Set the beginning of the temperature value
• Press Down the display button to stop temperature.
• On the Long press of the Down button, the display starts flashing, then press the Up or Down button Set to stop the temperature value.

 

Features :

·        Easy to install

·        Output type: AC Output (AC 220V 1500W).

·        Output capacity: MAX 10A temperature measurement, display; refrigeration, heating control

·        Temperature setting upper and lower limits

·        Simple operation, suitable for seafood machines.

·        Upper key: The start temperature is displayed in one press, and long press to set start temperature.

·        Lower key: The stop temperature is displayed in one press, and long press to set stop temperature.

 

Package Includes :

1 x XH-W3001 AC 220V 1500W Digital Microcomputer Thermostat Switch.

Usage/Application	For Industrial Use
Brand	A.K Enterprises
Number Of Poles	2 Pole
Coil Voltage	220 V
Current Output	0.05
Size	63*38*10
Input voltage range in reference to UN	6V ~ 30
Output Voltage	6V ~ 30
Model Name/Number	6-30V 1-Channel Power Relay Module

Minimum order quantity: 100 Piece

It is 6-30V 1-Channel Delay Power Relay Module with Onboard Adjustable Timing Cycle Switches with Digital LED display It is mostly used in Home Automation Delay Timer Control Switch Module Timer Controller. The Module operates at Operating voltage range of 6-30V, also it supports micro USB 5.0V power supply. Output capability: Can control the device within DC 30V 5A or AC 220V 5A. It can be applied to many fields as there is a wide range of application.

 Operation Mode:

1. P1: Trigger signal, the relay is on OP time, and then disconnect; Within the OP time, proceed as follows:
2. P1.1: the signal is triggered again, invalid
3. P1.2: the signal is triggered again, re-clocking
4. P1.3: Signal has triggered again, the relay is disconnected, stop the clock;
5. P-2: Trigger signal, after the CL time is off, the OP time is on. When the timing is completed, the replay will be disconnected;
6. P3.1: Trigger signal, after the OP time is on, the CL time is off, then cycle the above actions. If trigger signal within the loop, the relay will be disconnected and stop the clock. The number of cycles ( LOP ) can be set.
7. P3.2: No need to trigger the signal after powering up, the OP time is on, the CL time is off, then cycle the above actions; The number of cycles ( LOP ) can be set.
8. P-4: Signal holding function. If the signal is triggered, timing is cleared, the relay remains on; when the signal disappears, the relay will be off when the OP time is over; if another signal is triggered during timing, timing will be cleared.

 How to choose the time interval:parameter Introduction: OP power over time, turn off time CL, LOP cycle times (1-999 times, is unlimited cycle)1. In the selection of parameter set interface mode, and press the STOP button to select the time.(1)xxx. if the decimal point is in some place, the time interval is s-1 999 s(2)xx. x is the decimal place is ten, the time interval is 0.1 s 99.9 s-(3)x. x. x is the decimal point are all on, the time interval is 1 min-999 min How to set the parameter:

1. First, make sure relay operation mode
2. According to the operating relay mode, the main interface (power module will flash current operating mode; standard mode P1.1, then come into the main interface); long press SET key two seconds and then choose and enter selection interface mode; by pressing UP, DOWN key to choose the mode setting (P1.1 ~ P4)
3. After selecting the mode, press short SET to set the corresponding parameter, then the parameter you want to set will flash (OP power in time; CL power off time; LOP cycle times, is unlimited cycle ); by UP, DOWN to set the parameter value, support long press (increase or decrease quickly) and press slightly (increase or decrease of 1 unit); after setting the parameter value by short press the STOP key to choosing decimal place; choose the time interval (corresponding time interval is 0.1 s-999 min); Short press SET to set the current mode next parameter, the process is the same as above
4. After the setting mode parameter, press and hold the SET button then hold the current configuration mode will flash, then go back to the main interface; define success parameter main interface: when the relay does not work, it will show 000 (no decimal point); the operating state relay, the screen has a decimal point

 

 Mode Select Interface:press and hold the SET key to enter; after setting, long-press the SET button back on the main interface  Activate Relay Mode:

1. NO: PO in power over time, the relay can be connected
2. OFF: relay is not allowed to connect, when in the off state

in short main interface press the STOP key to achieve turn ON and OFF, the current state will flash; then back to the main interface(this function is a function of a sudden stop, 1 key to turn off the relay)Sleep Mode:C-P Sleep mode: within 5 minutes

Control Type	PID
Application Area	for Plastic Industry
No of digits	4+7
Mounting Type	Surface Mounting
Display Size	72*72 mm
Output type	Relay
Sensor Input	RTD
Voltage	220-240 V

Minimum order quantity: 100 Piece

This is STC-1000 220V AC All Purpose Digital Temperature Controller Thermostat Module. A temperature measurement and Controller tool with high accuracy and precision at a very low cost.

It offers a high-temperature control precision of 0.1℃. The temperature control range from -50℃ to 99℃.

The LED display shows the results clearly. One can directly install or embed the STC-1000 in industrial control equipment panel, convenient and quick.

It features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.

 

Features :-

Seamlessly Switch between the temperature modes (between cool and heat).
Temperature is controlled by setting the temperature value and the difference value.
Manual temperature calibration is available.
Refrigerating control output delay protection is built-in.
An alarm outputs a warning sound when the temperature exceeds temperature limit or when the sensor outputs error.

 

Package includes :-

1 x 220V Mini Digital Temperature Controller.
1 x Temperature sensor probe with cable.
1 x Instruction Manual.

Temperature Range	-50 ~ 110 C
Usage/Application	Industrial
Size	48mm x 40mm x 14mm
Power Supply	20 Watt
Input Voltage	20 V
Operating Voltage	Input Power (DC): 12V
Power Consumption	Static Current: <=35mA Current: <=65mA
Model Name/Number	W1209

W1209 Module SPECIFICATIONS:-

• Temperature Control Range: -50 ~ 110 C
• Resolution at -9.9 to 99.9: 0.1 C
• Resolution at all other temperatures: 1 C
• Measurement Accuracy: 0.1 C
• Control Accuracy: 0.1 C
• Refresh Rate: 0.5 Seconds
• Input Power (DC): 12V
• Measuring Inputs: NTC (10K 0.5%)
• Waterproof Sensor: 0.5M
• Output: 1 Channel Relay Output,
• Capacity: 10A

Power Consumption:-

• Static Current: <=35mA
• Current: <=65mA

Environmental Requirements:-

• Temperature: -10 ~ 60 C
• Humidity: 20-85%

Dimensions:-

• 48mm x 40mm x 14mm

Settings Chart:-

• Long press the “SET” button to activate the menu.
• Code Description Range Default Value
• P0 Heat C/H C
• P1 Backlash Set 0.1-15 2
• P2 Upper Limit 110 110
• P3 Lower Limit -50 -50
• P4 Correction -7.0 ~ 7.0 0
• P5 Delay Start Time 0-10 mins 0
• P6 High-Temperature Alarm 0-110 OFF
• Long pressing +- will reset all values to their default